NewConstruction management for buildersFor builders in Australia & New Zealand

Price it. Run it. Get paid.

The whole job in one place: priced off your drawings, quotes lined up, call‑ups in step with the programme, claims drafted when the stage is done. Nothing goes out without your OK.

Price your first job
Your first run is free · No card · Then A$99 a job · No subscription needed

Priced off your drawings. Every figure shows where it came from.

The estimate screen: a client price, and how much of it was measured, calculated or allowed for

Real screens from the app, on sample data.

Priced from your drawingsNZ Building Code issues flaggedGST at 15% on every quote and claimA log of what it did, with undo
Price it

Every trade priced off your drawings.

Upload the PDFs. Structify measures the rooms, walls and openings, then prices each trade on your rates, or ours until you load them. Pick any trade to see the quantity, the rate and the sheet it came from.

Sample job, invented figures. Rendered from the job's own room sizes and wall runs.

Run it · try it on a sample job

Pick a headache. Watch it get handled.

Rain. Revised drawings. A quote that leaves something out. Timesheets. A claim that’s due. Tap one and see what Structify does about it, and what it leaves for your OK.

Tap onePlaying by itself. Tap one to take over.
27 Pukatea RidgewayProgrammeSample job
Site agentwhat it may do on its own

It moves the call-up and flags it for you, with Undo. At every setting the message is written for you to send.

Drag it onto a frame day, or tap itTap or drag it
  1. FrameCarter Carpentry
    On site
  2. RoofRoof plumber
    Booked
  3. WindowsGlazier
    Booked
  4. Electrical rough-inElectrician
    Confirmed
  5. Plumbing rough-inPlumber
    Booked
  1. 1You log it
  2. 2Programme moves
  3. 3Site agent acts
  4. 4You give the OK
What happened
Nothing yet.When it happens, this fills in: what the agents did about it, and what they left for you.
0things you did0done for you0waiting for your OK

Sample job, invented figures. Played faster than a real day: in the app the agents pick these up within minutes, or at the next morning check. Nothing is sent to a trade or a client, nothing is awarded and nothing is paid without you.

Autopilot

The agents do the work. You give the OK.

Six agents cover takeoff, pricing, tenders, site, money and compliance. You choose how much each one does on its own: file the day's diary, move a call-up, draft the claim that's due, match a bill to its order, cut tender packages, draft RFIs. Nothing is sent to a client or a trade on its own, nothing is paid, and anything done on its own can be undone from the log.

Ask meDo & tell meJust do it
Done while you were on siteSample log
  1. 06:10Filed Thursday’s site diary, drafted from Sam’s 9 photosSite agent
  2. 05:58Drafted Claim 3 for the frame stage you marked done. Not sentMoney agent
  3. 05:52Moved the tiler’s booking after the programme slippedSite agent
  4. 05:47Matched Carter Carpentry’s bill to its order, to the centMoney agent
  5. 05:40Wrote the Monday money noteQS agent
Why not just ask a chatbot?

Would you bet a $3.4M quote on a chatbot's guess?

$3.4M is the architect-designed sample job priced above: $3,462,808 incl GST. Sample job, invented figures.

Chatbots are good with words. Pricing a build is different. Every sheet has to be read, every area measured and every rate checked. That is the one job Structify is built to do.

TopicGeneral chatbot
DrawingsDrawingsSkims a screenshot or a pasted pageReads every sheet in the set: plans, elevations, sections and schedules
QuantitiesQuantitiesBallpark numbers you can’t traceEvery room and area measured, and each line linked to the spot on the sheet
RatesRatesWhatever was in its training dataRates priced for New Zealand, with your own rates on top
Specs & gapsSpecs & gapsFills the gaps without telling youShows what’s specified and what’s the owner’s selection, with every PC and PS item named and priced
CodeCodeGeneric building adviceFlags NZ Building Code (NZBC) issues on the drawings, with an RFI drafted for each
RevisionsRevisionsStarts again from zeroShows what changed between Rev B and Rev C, and what it costs
WorkingWorkingAn answer with no working shownEvery line labelled measured, calculated or allowance, so you know what to check
Every linelabelled measured, calculated or allowanceEvery sheetplans, elevations, sections and schedules readEvery areameasured off the drawings, not guessed from a photoYour ratesoverride ours on any line
Features

Everything a builder runs on.

Takeoff from drawingsDrop the PDFs and every sheet is read and measured in a few minutes. Each line links to the spot on the sheet it came from.
Floor areaMEASURED · A-101259.2 m²
Internal wallsMEASURED · A-10161.2 m
OpeningsMEASURED · A-50112
Engineered oakMEASURED · A-101186.8 m²
Wet-area floor tilingMEASURED · A-40228.8 m²
The sample job's ground floor. Sample job, invented figures.
Measuring · 1 of 14 roomsREV CA-101 · GROUND FLOORGarage43.56 m²Entry23.76 m²Study17.64 m²Hall10.08 m²Ensuite8.64 m²Guest bed15.12 m²Mud room5.76 m²Laundry10.08 m²Powder4.32 m²Gallery7.20 m²Butler's12.96 m²Kitchen22.68 m²Dining25.92 m²Living51.48 m²AlfrescoDeckvoid over14 40018 000
Estimates you can defendEvery line says whether it was measured, calculated or an allowance. Your rates override ours.62% measured26% calculated12% allowanceThe sample job's build trades, by value. Sample job, invented figures.
Tenders, levelledSend packages, see who has replied and compare quotes like for like. Scope gaps show up in dollars.
Northgate Steel$32,832Members: supply, fabricate, prime, erect, crane day2-pack paint finish to exposed members · not in this quote+ $7,288, our figure for what's missing (not their price) = $40,120 levelled
Harbourside Fabrication$42,822Complete · +11.6% on the estimate
Ridgeline Structural$37,757Complete · −1.6% on the estimate
Lowest full scope. Northgate Steel is $2,363 dearer once levelled.
Estimate $38,361 ex GST for lines 5 and 6, from the S-201 member schedule. Sample job, invented figures.
Revisions without the riskWhen a new set comes in, see what moved, what it costs and which tenders went out on the old set.REV C · CURRENTREV B · SUPERSEDED
A programme with costsWhen the programme slips you see what it costs, and each way to catch up comes with a price.
Site, sortedBookings, hours, photos, diary and RFIs in one place. Hours are checked against bookings before they reach you.
Claims & variationsClaims are drawn against the work that is finished, with GST stored. Clients approve variations on their phone.
Compliance checksDrawings are checked for NZ Building Code (NZBC) issues. Each problem comes with a drafted RFI.
Handover packDefects are tracked until they are fixed, and the handover pack is built from the certificates already on the job.

And the rest of the job, in the same place.

  • Drawing viewer
  • Specifications ledger
  • Site & suburb data
  • Client quotes
  • Purchase orders
  • Hours & timesheets
  • Bills matched to orders
  • PDF & CSV exports
  • and more
Structify for iPhone & Android

Run the job from the ute.

Your morning brief, your approvals and your site photos, on your phone. It already runs in your phone's browser, and the native apps are on the way.

  • A morning brief for every job with something on
  • Photos, hours and notes from site land on the right job
  • Your trades use a link, with no account and nothing to install
Coming soon to theApp StoreComing soon toGoogle Play

The phones show the sample jobs on this page. Sample job, invented figures.

Pricing

Pay for the job, not a subscription.

Run your jobs free. When you want one priced off the drawings, buy that job. Take Structify Pro once you're pricing a few a month.

FreeA$0for goodFor running your jobs by hand
  • Budgets, quotes, claims, the schedule and site links, run by hand
  • One drawing read on us, so you see your own job measured
  • No card to sign up
Start free
JobStart hereA$99ex GST, once per jobFor pricing one job, no subscription
  • Every page read: rooms, areas, openings and finishes
  • An itemised estimate off measured quantities, editable line by line
  • Design review: what's missing, what clashes, what to ask the architect
  • One re-issued set read again and compared
  • Paid once. Nothing to cancel
Price your first job
Structify ProA$399a month, ex GSTFor builders pricing and running several jobs at once
  • 10 new jobs a month, each with everything in a Job
  • Every re-issued set on those jobs included
  • Up to 10 logins for your office
  • Variations, RFIs, call-ups and claims drafted for you to check
  • Cancel anytime
See Structify Pro

A job is charged in Australian dollars, whatever your region. Full pricing and questions

Made for builders in Australia and New Zealand.

NZNew Zealand
  • NZ Building Code (NZBC) issues flagged on the drawings
  • Priced for New Zealand, with your own rates on top
  • GST at 15% on every quote and claim
  • Progress claims drawn against finished work, with GST stored
You're on the site for New Zealand
AUAustralia
  • Drawings checked against the NCC, clause by clause
  • Rates for your state, with your own rates on top
  • GST at 10% on every quote and claim
  • Progress claims drawn against finished work, with GST stored
Switch to the site for Australia

Your next job, priced tonight.

Drop the drawings you already have. Your first run is free, and there's no card to enter. After that it's A$99 a job, paid once.
Bring your drawing setChoose a PDF of your consent plans or construction set, or drop it on this card. Floor plans are enough to start.Your drawings stay on this computer until you sign up.Sign up first or email us to book a walkthrough